INDUSTRY INSIGHTS
Selection & System Design
Practical guidance for selecting RF power amplifiers by frequency range, output power, operating environment, antenna distance, power margin, redundancy, and system integration requirements.
06/18/2026
Choose an RF power amplifier module beyond the datasheet by checking input drive, usable output, 28 V power, thermal limits, RF paths, and test evidence.
06/17/2026
Build a C-UAS frequency strategy around target bands, protected frequencies, venue sectors, operating modes, RF paths, and evidence before PA selection.
06/17/2026
A wider band can hide weak edge output, higher heat, and limited system margin. Compare wideband, narrowband, and mixed RF PA architecture before RFQ.
06/17/2026
RF PA coverage can fail when required links, protected bands, operating states, antenna paths, and test evidence are mapped too late. Build the matrix first.
06/16/2026
C-UAS system EIRP is not defined by PA wattage alone. Calculate real EIRP from PA output, RF-path loss, antenna gain, direction, and operating conditions.
06/15/2026
RF Power Derating helps C-UAS teams verify hot cabinet output, duty cycle, supply margin, feeder loss, and derated antenna-port power.