Ask RFQ
INDUSTRY INSIGHTS

RF Chain, Antenna & EMC

Practical engineering guidance for RF feeder cables, connectors, adapters, antenna paths, insertion loss, grounding, shielding, impedance matching, EMI control, and antenna-side signal performance.
06/03/2026
An RF PA may pass a 50 Ω dummy-load test yet show a fault after the antenna feed is installed. This guide isolates the feed interface from cable and antenna faults, then defines the measurement plane, mechanical condition, and final hot-state evidence needed for PASS, RETEST, or ROUTE.
06/03/2026
Diagnose hidden RF PA shielding paths, separate them from grounding and routing faults, and verify the restored closed-cover condition.
06/02/2026
RF cable bending can affect VSWR, insertion loss, and downstream power. Control bend radius, connector strain, cabinet routing, and final-route verification.
06/02/2026
Learn how to prevent water ingress at outdoor RF PA connectors, identify entry paths, separate moisture faults from broader VSWR problems, decide when damaged hardware must be replaced, and define the post-repair RF evidence needed before the resealed connection returns to service.
06/01/2026
RF PA grounding can cause false alarms, feedback drift and EMI. Learn how to separate DC return, signal reference, chassis bond and test ground under load.
06/01/2026
RF Power Amplifier Connector Problems can cause reflected power alarms when poor crimping, shield contact, or cable mismatch breaks the 50Ω RF path.